- 全新吸氫機HC-300S上市,適逢溫馨五月母親節來臨,JO4XK6孝敬偉大媽咪特價優惠中,歡迎來電洽詢
- 全新吸氫機HC-300S上市,適逢溫馨五月母親節來臨,吸氫機特價優惠中,禧源優與您一起孝敬偉大媽咪,歡迎來電洽詢
- 全新吸氫機HC-300S上市,適逢溫馨五月母親節來臨,吸氫機特價優惠中,禧源優與您一起孝敬偉大媽咪,歡迎來電洽詢
- 溫馨五月感恩母親節~氫鬆呵護全天下媽媽!
- ★★狂賀 Hiend禧源優榮獲2016國家品牌玉山獎★★
- ☆ ★~歡迎您到留言版給我們加油打氣~☆ ★
- ☆ ★~歡迎光臨本站~☆ ★
- 舊雨新知、歡迎有空來坐坐~
Portable Hydrogen Gas Generator
Premium Dual Effects Portable Hydrogen Gas Bottle
Precautions
《Precautions 》
|
|
1. Precautions Before Use | |
① | During charging, the LED appears green light , and will be automatically off on full charge which takes around 4 hours |
② | Load water to the line of 300ml and press the button for the second time (at least 30 min. needed for trial run) |
③ |
On hearing of the ‘BEEP’ sound after 30 min., pour away the water and start to use
Concerning the water, be sure to renew the water everyday |
● |
Recommendation for water source Use general mineral water or the filtered water (soft water or hardness not over 60. The sodium content not over 15mg/100ml) |
2. How to breathe in the Hydrogen gas | |
① |
Untighten the top cap (slightly turn to loose) |
② |
Load the water to the line of 100ml, close the cap and tighten |
③ |
Set the cannula onto the top cap air outlet connector |
④ |
Insert the nostril cannula into the nostril |
⑤ |
Double press the button and ‘BEEP’ sound heard |
⑥ |
It lasts 30 minutes for one time. (for continuous use, just double press again) Breathe through nose as possible as you can. The used water could be drinkable or used as make-up water. |
※ |
The way to use nostril cannulaInsert the parallel cannula into nostril with curve way downwards. If oppositely, the Hydrogen could not be breathed in. Insert the two outlets into nostril first then hang on the ears. Adjust the knot till the fixed position. |
※ |
The notice to pull the cannula out of the cap connector Rinse the connector with some water to pull out easily. If still can’t, use one hand to grab the connector, another hand to shake the bottle |
3.The method to produce the Hydrogen water | |
① |
Untighten the top cap (slightly turn to loose ) |
② |
Load the required water amount and open the cap to produce。 |
③ |
Press the button then wait for about 3 minutes 30 seconds to complete production. |
※ | Notice : maintenance required (please consult your agent for any charge) |
※ |
MUST : when central set doesn’t appear bubbles (maintenance needed every 1.5 year ~2 years) The nostril cannula to be changed every 1~3 month to function normally. If any headache, stomachache, eye spasm occurs, it is well-returning sign,and will disappear within 2~3 weeks. For any strong reaction, the breathing time can be adjusted. ( starting from 10 min.) |
How to clean the container | |
① |
Firstly, dismantle the parts of the bottle |
② |
Use dry cloth or paper towel to wipe clean the bottle |
③ |
Clean the bottle with water gently |
※ |
Since O3 will generate during the re-producing process to appear sterilized condition, there is no need to wash every time until really dirty. The nostril cannula can be cleaned with the degerming paper and the central set to be washed every 1~2 month.Put 50cc water + 1/3 spoon of Citric acid into the bottle and double press the button to produce the Hydrogen gas to sterilize the bottle. If really dirty, just extend the sterilizing time. |
※ |
Do not try to dry the bottom base of the central set to prevent from being damaged easily. |
Q : Fail to charge
A : Check out if the charger put in right direction. ( black dot at back side)
Q : No Hydrogen gas being generated
A : The central set becomes dry condition
※ If the bottom base is dry, do not put it upside down. Just make Hydrogen water a few more time.
Q : No Hydrogen gas being breathed
A : There could be water inside the nostril cannula.Only clean up the water in the cannula can Hydrogen gas be breathed.
Q : if leaking happens
A : The gap at the bottom should be tightened.Otherwise, dismantle and clean the bottle then tighten again.
Q : The Hydrogen gas finishes by 30 minutes
A : It could happen if the button is not double pressed rapidly.
※ The correct way is to double press the button and hear the ‘BEEP’ sound, otherwise, it will stop after 3 minutes 30 seconds
To stop during the operation, just long press the button or pour down the water.
Q : How to deal with the stain or mold
A : Just put citric acid in for about 30 minutes
※We can put some water inside the bottle when not in use. It will better refrain the mold occurring. Remember to shake the bottle and pour away the old water when using.
Web : www.mytopwater.com
Tel:04-23200538
Working hour:Monday thru Friday AM9:00 - PM6:00 (Break time 12:00-PM1:00)
Mailbox:chiangyuan888@gmail.com
Specialized in :Hydrogen water filter / Hydrogen gas machine / Whole-house type central water filter / Business use drinking fountain / Personal use water filter / Patented Chlorine removing spa filter / Environmental protection laundry ball / Grease removing faucet